Hair dye method

Written By The HealthMeth Team - Updated On Monday, January 4, 2021 2:00 PM

Many women and girls want to change the color of their hair and dye it without resorting to beauty salons, and some of them may find that the matter is easy and can be implemented simply, and others find it very difficult and find beauty salons the ideal and appropriate solution to this matter. Madam, dyeing hair at home is not a difficult thing, and you can implement it quite easily if you are fully aware of the steps to choose the color that suits your skin and your original hair color, and if you are familiar with the steps of dyeing hair from A to Z, and to make it easier for you I will explain the method of dyeing hair until You get a great color that suits you perfectly.


Choose the right color for you

To begin with, you must determine your original hair color and choose the new one, taking into account avoiding some colors such as burgundy, red, orange, pink, purple, and indigo; Because these colors, if dyed onto the original hair floor, will result in a faded, opaque color. In order to have hair with a new look within the list of these colors, it is necessary to withdraw the original hair color, and then dye the hair. Many girls want these bright and bright colors with the advent of the summer to keep up with the latest fashion, but pulling the hair color causes damage to the hair and loses its natural properties, and although you can pull the color from the hair at home, it is better to do this by even a professional beauty expert It protects your hair as much as possible from the damage caused by pulling the color, especially if you want to dye your hair completely, but if you intend to dye some strands, you can do that easily at home, and I will talk about it later.


Most Arab women have dark hair, which varies between black, brown, and chestnut, although there is a small group that enjoys lighter shades of blond, so if you want to dye your hair in a color of brown, such as chocolate, honey, chestnut, or brown with blond; You can achieve color from the first time if the ground of your hair is dark, while if the floor of your hair is tilted to black, or brown and you want to dye it light blond, gray, ash, or snowy, you can not achieve this color easily unless your original hair color is light from Shades of light blond, then you can lighten your hair from a dark brown color to the beginning of the blond color and then dye it in a color of ash, gray, or snow, and the result will definitely be satisfactory.


But if you want to dye your hair black or bluish-black, you can achieve this color the first time, regardless of the ground of your hair, but it must be taken into account that you cannot re-dye your hair a light color after dyeing it with black because it leads to the colors conflicting together and not achieving the desired color. . The same applies to henna, as it is necessary to withdraw the color from a beauty expert for those who used the black dye and its derivatives and henna.


Things to consider before starting the hair dyeing process

The choice of oxygen and its concentration must be noted, and there is oxygen with a specific concentration to cover white hair, and oxygen for gray-free hair. After you know the ways to choose the color that suits the floor of your hair, you should start learning the steps for dyeing hair at home, for this you need a special brush to use to apply the dye to the hair, a special container, and a thin comb with a pointed tip to separate and divide the hair, as these tools are sold in retail stores. Cosmetic tools are cheap. You also need nylon gloves, cotton circles, a little Vaseline, some hair clips, a cap or a builder to cover the hair after dyeing, and finally you have to choose the color of the dye that suits you, provided that it is of good quality.


Steps for dyeing hair

  • To begin with, you must empty the contents of the dye package into the designated container, empty the oxygen container and mix the two together until they become a single mixture.
  • Apply a light layer of Vaseline around the hairline, such as the top of the forehead, the sides of the face, and the bottom of the neck, so that the Vaseline forms a layer that protects the skin from dye damage, and so that it is easily wiped off.
  • Start by dividing your hair into four sections and secure each section with a clip.
  • Start by applying the dye from the ends of the hair from the bottom and leave the front roots to the other, because the bottom of the hair needs time to lighten, unlike the front of the head and the beginning of the roots, which quickly gain color.
  • Start section by section, and use the tapered comb to divide the hair into strands, hold each strand and start applying the dye on it with the specialized brush, then repeat the process until you finish the first section, and start the other section in a row and the third and fourth sections until you finish all of your hair.
  • After you finish dyeing the hair, you can comb your hair using a wide-toothed comb, so that the dye is distributed throughout your hair well.
  • Gather your hair, wrap it up, and secure it with a special hair dye cap.
  • You can time from now for half an hour from the moment of finishing the dyeing process, some types of hair, especially thick ones, are slow to lighten, so there is no objection to increasing the period only ten additional minutes, this matter is due to the nature of your hair, and it is completely prevented from increasing the duration more than that, as this The matter may cause some skin infections of the scalp, and there is no benefit to be desired from an increase in the time.
  • After the specified time has passed, you can take off the pannier or cape, and wash your hair first with warm water and shampoo secondly in order to get rid of the residual dye, you can use a color fixer or conditioner for hair, as some types of dyes contain both types, and you can use an oil bath designed to care for dyed hair.
  • Towel dry your hair, you can now dry it with the dryer after it gets wet, and enjoy your new hair color.


Steps to make highlights of light or light

  • You can lighten your hair color or keep it color if it is light.
  • Mesh powder is used to create colored highlights, and you need a perforated cap if you have short hair, or you can use foil clips if you have long hair.
  • The cap is placed on the head and by means of a hair-pulling hook, the hair is pulled from the holes, spaced slightly apart.
  • The mesh powder is mixed with oxygen, and to reduce the damage to the mesh, you can mix a spoonful of any oil bath you prefer.
  • Spread the mesh powder mixed with oxygen on the hair strands that have been pulled, and cover with another nylon builder. You can expose your hair to the high drying temperature if you want the high-luminous high-light strands.
  • Leave the mesh powder for a period ranging from a third to half an hour, and the duration is never increased.
  • You can now gently pull the dye cap from your hair, wash and comb it to blend the strands with the rest of the hair.
  • If you have long hair, you can use a comb with a tapered head and implant the hair with it with a zigzag movement, then apply mesh powder and oxygen and wrap the strands with foil paper, you have to repeat the steps to finish the hair completely, then wash the hair and comb.
  • You can make hair rinse to reduce the shine of the strands and give the hair a beautiful uniform color. If you want low-light strands, this matter is up to you.
  • You can intensify the oil baths after using the mesh powder to compensate for the greatest possible damage, as the mesh powder is one of the types of very strong dyes on the hair.


Steps to make colorful tufts

  • You can buy pigment coloring from beauty stores, and it is available in several colors with oxygen assigned to it (red, pink, purple, indigo, blue).
  • Determine the strands to be colored, you must lighten them using the ice blond dye, if your hair is dark, you can repeat applying the dye to the strand until you get a very light color for the strand, which enables it to absorb the light colors.
  • After lightening the strand, mix a little bit of coloring dye with a little oxygen, and apply the dye to the entire strand, wrap it with foil and wait half an hour to come to the washing stage.
  • You can save the remaining stain for next time.
  • Note that most bright colors do not last for more than two weeks and begin to fade.